- Register
- Log in
- Wishlist 0
- Shopping Cart 0You have no items in your shopping cart.
Tools
View as
Sort by
Oil Mixture Measuring Bottle
1 quart oil mixture bottle . Measure out the right amount of oil for each gallon of fuel .
$6.95
Performance Worksheet
Down load our free worksheet . Take it to the lake and record all of your information from testing . Compare to other testing sessions to find your best setup . Keeps track of what props etc worked per setup . Great information to look over . PDF file. Read below for instructions.
$0.00
Piston Stopper Tool
Piston stopper tool for engines with 10mm threads. Works on Zenoah G230RC / G260RC / G240RC / G270RC / G290RC / G320RC / G260PU / G260PUH / G231PUH / G231PUM / G260PUM / GZ25N14 / GZ25N23 engines. Also works on Chung Yang CY23RC / CY26RC / CY27RC / CY29RC / GP290 / GP420 / GP460 engines. In general, fits engines with 10mm spark plug hole threads (for example, engines which use NGK "C" class spark plugs like the CMR7H, CR8HIX, etc). Threads into spark plug hole and stops piston from moving, allowing easy removal of flywheel and other rotating parts. This stopper is interchangeable with Zenoah part # 4810-96220 481096220, and with HPI part # Z966.
$8.95
Prop Balancer
This is Dubro's Tru-Spin Prop Balancer. FEATURES Completely Adjustable Propeller Balancer Precision-Machined Rotating Wheels to Assure Perfect Balance Easily Unique Over/Under Set-Up Option Accomodates Even Large-Scale Props
$41.95 $35.95
Spring Tool
Tool for removing & installing springs on the hot pipe setup . No more struggling ! Very easy to use . If you have a hot pipe with the external springs , this tool is for you !
$10.95
Super Collet Removal Tool
Use this solid collet plug to remove your super collet without damage. Simply remove the existing insert, and loosen the screw 2-3 turns. Put this removal plug in place, and tighten the collet with two wrenches as you normally would. The collet pops off every time! No damage to the collet or insert. No holding the flywheel! Reusable many times.
$6.95
Tap & Drill Set, Metric
For the modeler who would like to have a complete set of taps and drills at a savings over purchasing individual sets. 10 piece metric tap and drill set comes complete with 2MM, 2.5MM, 3.0MM, 4.0MM, and 5.0MM tap and drill sets. One complete set per package.
$45.30 $39.95
Tap & Drill Set, Standard
For the modeler who would like to have a complete set of taps and drills at a savings over purchasing individual sets. The five piece assortment comes complete in vinyl storage pouch. 10 piece standard tap and drill set comes complete with 2-56, 4-40, 6-32, 8-32, and 10-32 tap and drill sets. 1 complete set per package.
$37.50 $31.95
Water Jacket Installation Tool - V2.
By using this tool , the water jacket is pressed down over the o-rings to properly seat the water jacket .This tool threads into the sparkplug hole / tighten the jam nut to push the jacket down . Next install the 3mm bolts and tighten accordingly . This will lessen the possibility of stripping the small bolt holes . We have been using this style of tool for years . Very handy . Comes with bolt / jam nut / 2 steel washers / 1 nylon washer and a protective sleeve for storage .
$12.95 $8.95
