Radios

View as Grid List
Sort by

3PM-2.4G MX

This is the Futaba 3-Channel 3PMX Computer Radio with the 2.4GHz FASST System. Transmitter and R603FF receiver only, servos not included. The 3PMX is also capable of using the R603FS receiver to give modelers special Dual Antenna Diversity (DAD). **The 3PMX adds three new features; Four Wheel Steering Mixing,** **Digital Trim Step and Adjuster for Crawlers, Monster Trucks** **and any four wheel drive vehicle. These features allow drivers** **to apply mixing between steering, throttle and channel 3.** FEATURES: FASST (Futaba Advanced Spread Spectrum Technology) sends twice as much information to the receiver at eight times the resolution of standard systems for unsurpassed control and smooth servo travel 2.4GHz circuitry is wired directly into transmitter eliminating separate plug-in modules "Auto Detect" instantly determines whether HRS or PPM mode is active in the receiver (R603FS only) Special ID code prevents signal interruption by rejecting unwanted signals Brake mixing for large cars Anti-skid braking system (ABS) Throttle Acceleration (ACC) minimizes time lag before clutch and brakes are connected in gasoline engine cars Steering speed adjusts steering servo operating speed Racing timer Function select lever function In addition to great performance in R/C car and truck applications, this system is also ideally suited to the rigors of boat racing 10 Model Memory One year limited warranty through manufacturer INCLUDES: 2.4GHz FASST Futaba 3-Channel 3PMX transmitter 2.4GHz FASST Futaba R603FF 3-Channel Receiver (FUTL7631) ON/OFF switch harness Instruction manual REQUIRES: AA Batteries: Eight for transmitter Servos of modeler's choice SPECS: Transmitter; Current Drain: 250mA or less Transmitting Antenna: 2.4GHz Receiver; Reception Antenna: External Power Requirement: 6V NiCd battery Size: 1.5 x 1 x 0.55" (39 x 26 x 14mm) Weight 0.45oz (12.8g)
$154.60

3PV-2.4G

This is the Futaba 3PV 3-Channel Radio System with the 3-Channel R203GF Receiver. FEATURES: FHSS/T-FHSS, S-FHSS protocols Large, easy to read programming screen Four wheel steering and brake mixing Model data copy Anti-lock brake system (ABS) function R203GF 3-channel receiver is ideal for brushless ESCs and digital servos DT3 selection SW1 Throttle fail safe Steering and throttle trim Channel 4 trim Sub trim Steering dual rate adjustment Steering and throttle end point adjustment Channel 3 and 4 end point adjustment, and servo reversing Steering and throttle exponential Auto power off after ten minutes One year limited warranty through Hobby Services beginning at date of purchase INCLUDES: Futaba 3PV 3-Channel Transmitter, 3-Channel R203GF Receiver, Instruction Manual REQUIRES: AA Batteries: Four for transmitter (may also be powered by the Futaba HT5F1800B 6V NiMH pack FUTM1482, or the Hobbico LiFe 6.6V 1900mAh pack, HCAM6521 SPECS: Transmitter; Transmitting Frequency: 2.4GHz band Power Requirement: Four AA cells Current Drain: 100mA or less Transmission Antenna: Dipole (built in) Communication Method: Two way T-FHSS,one way S-FHSS, FHSS operating system R203GF Receiver, FUTL7603; Dimensions: 1.54 x 0.91 x 0.33" (39 x 26 x 10mm) Weight: 0.28oz (8g) Operating Voltage: 4.8 - 7.4V (shared with servo) Battery Fail Safe Voltage: 3.8V* Current Drain: 30mA at no signal *Battery fail safe voltage is set for 4-cell NiCd/NiMH battery. Battery F/S does not work properly when other type of battery is used Antenna Length: 7.5" (190.5mm)
$109.99

4PLS-2.4G

This is the Futaba 4PLS 2.4GHz T-FHSS Radio System with the R304SB 4-Channel Telemetry Receiver. Transmitter and Receiver only, servos not included. FEATURES: T-FHSS (telemetry), FHSS and S-FHSS transmission modes Temperature, voltages and RPM can be monitored in real-time, and logged for future reference (sensors not included, must be purchased separately, see COMMENTS below) 40 model memory 10 character model naming and user name Fail safe on all channels Large 128x64 dot backlit LCD display with contrast adjustment Gyro, dual ESC, four wheel steering and brake mixing Anti-skid braking system Throttle acceleration reduces time lage of clutch & brake operation Throttle and steering speed adjustment Racing timer records 100 lap times and total time One programmable mix User updatable software using the CIU-2 PC Interface (not included) Data logging at user-settable intervals Assignable functions Model data transfer, model copy and model clear MC LINK Digital trims Steering wheel and trigger adjustments One year limited warranty through Futaba beginning at date of purchase INCLUDES: Futaba 4PLS 2.4GHz T-FHSS Radio System, R304SB Receiver, On/Off Switch, Mini Screwdriver, and Instruction Manual REQUIRES: AA Batteries: Four for transmitter (You may also use a 2C 6.6V LiFe battery such as HCAM6521) Servos of modeler's choice SPECS: T-FHSS/S-FHSS/FHSS Transmitter; Transmitting Frequency: 2.4GHz Power Requirement: Four AA Current Drain: 150mA or less Transmission Antenna: 1/2 di-pole R304SB Receiver; Power Requirement: 4.8 - 7.4V battery Receiving Frequency: 2.4GHz System: T-FHSS (auto detection) Dimensions: 1.38 x 0.91 x 0.33" (35.1 x 23.2 x 8.5mm) Weight: 0.23oz (6.6g) COMMENTS: The following sensors will work with this system; Temperature Sensor, FUTM0854 RPM Sensor, FUTM0852 Voltage Sensor, FUTM0855 If wanting a LiFe battery for the transmitter, the Hobbico LiFe 6.6V 1900mAh 2 Cell Battery Pack (HCAM6521) is an ideal choice.
$179.99

MX-V PISTOL GRIP 3CH 2.4GHZ FH.2 RADIO

2.4ghz radio system
$194.95 $129.95

TTX300 3-Channel SLT 2.4GHz Radio

Tactic TTX300 2.4GHz 3-Channel Surface Pistol Grip Radio
$79.95 $49.95